The fresh water layered storage cylinders TTE 600 FA 1 to TTE 1000 FA 1 are solar storage cylinders of the highest efficiency class for auxiliary heating solar installations. They are particularly suitable for use with Schüco heat pumps due to their large heat exchanger surfaces. Integrated convection control valves prevent heat loss.
Key benefits:
Excellent hygiene standards in combination with Schüco fresh water stations.
The Schüco buffer storage cylinders are available with or without solar heat exchangers. The option with a heat exchanger can be connected to single circuit solar stations and is also suitable for small to medium-sized solar energy systems in conjunction with a fresh water station. Operating this storage cylinder without a heat exchanger when combined with a large installation transfer station stores the solar heat in storage cylinder cascades for larger collector arrays.
Key benefits:
Intelligent control for optimum operation and maximum yields
Solar stations and control units control the entire solar energy system and allow optimum connection to any heating system. Schüco solar stations meet the highest quality requirements and ensure reliably high solar yields. The integrated control unit can be used to request information such as solar yields and operating states.
Demand-driven circulation saves energy
All Schüco solar control units allow demand-driven circulation. This means that when the tap is turned on, the pump switches on and hot water is transported to the tap. The pump then switches itself off again automatically. This avoids heat loss and power consumption is minimized by the pump.
Automatic setting
Solar stations control the flow of solar fluid from the collectors into the solar storage cylinder. The solar yields can only be effectively fed into the storage cylinder with an optimum volume flow. Schüco solar stations continually measure the volume flow and automatically make the optimum setting for any operating state. There is no need for the installer to set the volume flow manually, as is otherwise usually required.
Key benefits:
Reduce additional costs using solar thermal
A solar thermal system provides an opportunity to reduce additional costs not only for small houses, but also for larger residential buildings. Residential buildings with solar energy systems are much in demand among tenants. There is relatively little structural work required for the installation of a solar thermal system.
A variety of uses
As well as traditional apartment buildings, in principle all projects that require thermal energy are suitable for a solar thermal system.
Examples include:
